?unique=a2478ff)
eSUN PLA 3D Filament, 1KG
PLA is an environment-friendly material.
PLA 3D printer filament is easy to print and the printed model has smooth surface. Compared with ABS filament, eSUN PLA filament has higher rigidity and strength similar to PC, and does not need to close the cavity; Our best PLA filament has low shrinkage rate, no warping, no cracking, and can print large size model.
| Brand: eSUN |
| Size: 1.75mm Diameter |
| Weight: 1Kg |
eSUN PLA
Description
No pungent smell when PLA 3D printer filament are printed, safe and environmental protection.eSUN PLA filament has be approved by FDA, safer for use; Our best PLA filament can be used for conceptual model, rapid prototyping, and metal parts casting.
Selling point
High speed printing
Smooth printed surface
Easy to print
About eSUN
After years of market development, eSUN's products have been recognized by customers all over the world, and sold to nearly 70 countries and regions, enjoying a global reputation.
Print Models
Filament Properties Table |
|
|---|---|
| 3D PRINTING FILAMENT | PLA |
| Density(g/cm3) | 1.2 |
| Heat Distortion Temp(℃,0.45MPa) | 53 |
| Melt Flow Index(g/10min) | 3.5（190℃/2.16kg） |
| Tensile Strength(MPa) | 72 |
| Elongation at Break(%) | 11.8 |
| Flexural Strength(MPa) | 90 |
| Flexural Modulus(MPa) | 1915 |
| IZOD Impact Strength(kJ/㎡) | 5.4 |
| Durability | 4/10 |
| Printability | 9/10 |
Recommended printing parameters |
|
| Extruder Temperature(℃) | 190 – 230℃ Recommended temperature：215℃ |
| Bed temperature(℃) | 45 – 60°C |
| Fan Speed | 100% |
| Printing Speed | 40 – 100mm/s |
| Heated Bed | Optional |
| Recommended Build Surfaces | Masking paper, PVP solid glue, PEI |
