Why we need Wash and Cure Station for Resin 3D Printing?

The curing and washing are a very important step when you are using a resin printer. If the print isn´t cured in a proper way, it can remain soft and fragile. The washing is also important. There are different ways to wash your prints. If you have a water washable resin, you can just use regular tap-water. In other cases, you must use a resin cleaner, or IPA. 3D Prima can, of course, provide you with all solutions.

Wash and Cure 3.0 from Anycubic 

is the perfect 2-in-1 solution for post-processing finished printed resin models. The powerful device with a cleaning capacity of 3 litres is the perfect addition to LCD 3D printers with a size of 7.3 inches or less.

Larger all around for more capacity

Compared to its predecessor, Wash & Cure 2.0, the successor version Wash & Cure 3.0 has a few changes:

• The cleaning capacity has been doubled to 3 litres,
• The total volume of the cleaning basket is now 4 litres,
• The curing size has been increased by 15% to 160 x 180 mm to enable post-processing of larger models or multiple small objects in one pass.

Anycubic's new all-in-one Wash and Cure Max solution 

makes post-processing your resin prints child's play. The capacity of 14.9 l creates enough space to easily clean and post-cure even large models.

Even bigger, even more compatible

Wash & Cure Max has a capacity of 14.9 l and is therefore larger than many comparable all-in-one solutions. The impressive maximum size for cleaning of 300 x 165 x 300 mm makes the device compatible with countless 3D printers, including larger ones. So you don't have to worry about lack of space!

Powerful and efficient

Anycubic introduces two new modes to clean your models with Wash & Cure Max:

Spray rinsing safely and efficiently removes resin residues from the model surface, while detailed dipping carefully removes resin from intricate details.

Efficient cleaning also saves you cleaning fluid.

Wash & cure in one click

Your models are washed and cured with just one click. Time-consuming and laborious post-processing of your models is therefore a thing of the past.

360° curing

The automatically rotating platform rotates completely on its own axis, ensuring that all areas of your model are sufficiently cured.

Sophisticated design

Wash & Cure Max is not only powerful but also looks really good and is well thought out. The cover makes the post-processing of your 3D prints easier for you by simply opening and closing it, the same applies to the simple control unit. The device has intelligent error detection, which makes your work even safer and alerts you to the open cover, blocked outlets or similar before operation.

Wash & Cure 3.0 Plus from Anycubic 

is the perfect 2-in-1 solution for post-processing finished printed resin models. The powerful device with a cleaning capacity of 7.6 litres is the perfect addition to LCD 3D printers with a size of 10.6 inches or less.

Larger all around for more capacity

Compared to its predecessor, the Wash & Cure Plus, the successor version, Wash & Cure 3.0 Plus, has a few changes:

• The cleaning capacity has been increased to 7.6 litres,
• The total volume of the cleaning basket is now 12 litres,
• The curing size has been expanded by 42% to 220 x 260 mm to enable post-processing of larger models or multiple small objects in one pass.

Flexicure Gooseneck Light design and new light source arrangement for more even curing

By using the Flexicure Gooseneck light design or the gooseneck light, the energy value is increased by 30,000 uW/cm² within an irradiation range of 1-3 cm. The light balls and lens light source have also been arranged completely differently compared to the previous version, which contributes to more even and thorough curing of otherwise difficult-to-reach areas.

Uniform, targeted curing  Mercury XS Bundle from Elegoo

With the help of the Mercury XS Bundle from Elegoo, your resin models will be cured evenly due to the positioning of the UV LEDs and the turntable. In addition to the two vertically mounted LED rows, your model is illuminated from below by an additional row of LEDs. The design of the rotating platform always keeps your models in position and ensures that no model slips.

The Mercury XS Bundle includes a handheld UV lamp for hard-to-reach areas of the printed object, which you can use to rework the model in a targeted manner.

Washing large objects

The Mercury XS Bundle includes a wash station with a capacity of over 7000 ml. The wash tank is sealed to thoroughly and safely clean your 3D models.

Easy handling

Both devices are operated using a single rotary knob, which also serves as a display. Washing and curing has never been easier.