Bambu Lab PLA-CF in Pakistan
- Carbon Fiber Texture & Minimized Layer Lines
- Improved Mechanical Properties
- Stablized Printing Dimension
- Comes with Basic Reusable Spool
- Diameter: 1.75mm +/- 0.03mm
Cautions for Use
- 0.2 mm Nozzle Not Compatible
- Stainless Steel Nozzle Not Recommended
- Dry before Use for the Highest Print Quality
- AMS Compatible
Brand: BAMBU LAB |
Weight: 1Kg |
Bambu Lab PLA-CF in Pakistan
Bambu PLA-CF is carbon fiber reinforced PLA with improved stiffness and strength. PLA-CF is easy to print and beginner-friendly like regular PLA. It is AMS compatible with low clogging risk at high-speed printing. The prints are in matte finish with almost invisible layer lines, which make it suitable for printing general engineering parts or models requiring a better appearance, like bike frames, brackets and toys.
Carbon fiber texture & Minimized layer lines
The addition of carbon fiber gives prints a unique matte finish and effectively hides layer lines, providing a smooth, premium look.
Display of Prints
Bambu PLA-CF could be paired with any PLA series filament to make your prints more colorful and achieve various texture requirements.
Mechanical Properties Comparison
PLA Matte | PLA-CF | Improved % | |
Tensile Strength - XY/MPa | 32 | 38 | 19% |
Tensile Strength - Z/MPa | 25 | 26 | 4% |
Bending Strength - XY/MPa | 53 | 89 | 68% |
Bending Strength - Z/MPa | 32 | 49 | 53% |
Bending Modulus - XY/MPa | 2360 | 3950 | 67% |
Bending Modulus - Z/MPa | 2040 | 2260 | 10% |
Impact Strength - XY/(kJ/m²) | 19.2 | 23.2 | 20% |
Impact Strength - Z/(kJ/m²) | 6.6 | 7.8 | 18% |
*Drying PLA is recommended for humid environments at 55 °C for 8 hours before printing.
Accessory Compatibility
Recommended | Not Recommended | |
Build Plate | Cool Plate, High Temperature Plate or Textured PEI Plate | Engineering Plate |
Hotend | Hardened Steel Nozzle (0.4 / 0.6 / 0.8 mm) | Stainless Steel Nozzle (0.2 / 0.4 mm) |
Glue | Bambu Liquid Glue Glue Stick |
RFID for Intelligent Printing
All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).
Load and print! No more tedious setting steps.
Recommended Printing Settings | |
Drying Settings (Blast Drying Oven) | 55 °C, 8 h |
Printing and Keeping Container's Humidity | < 20% RH (Sealed, with Desiccant) |
Nozzle Temperature | 210 - 240 °C |
Bed Temperature (with Glue) | 35 - 45 °C |
Printing Speed | < 200 mm/s |
Physical Properties | |
Density | 1.22 g/cm³ |
Vicat Softening Temperature | 69 °C |
Heat Deflection Temperature | 55 °C |
Melting Temperature | 165 °C |
Melt Index | 3.7 ± 0.6 g/10 min |
Mechanical Properties | |
Tensile Strength | 38 ± 4 MPa |
Breaking Elongation Rate | 8.4 ± 3.2 % |
Bending Modulus | 3950 ± 190 MPa |
Bending Strength | 89 ± 4 MPa |
Impact Strength | 23.2 ± 3.7 kJ/m² |