?unique=b67de60)
?unique=b67de60)
Bambu Lab A1 mini 3D Printer in Pakistan | Desktop 3D Printer
- Works right out of the box, set up in 15 minutes
- Well-polished hardware and software
- Enclosed-body for high-temperature filament printing
- Up to 16-color printing with AMS
- Up to 20000 mm/s² acceleration, prints a benchy in 18min
- Build-in camera for remote monitoring and timelapse
| Brand: BAMBU LAB |
Bambu Lab
A1 mini Combo
- Multi-Color Printing
- Plug-N-Play
- Active Flow Rate Compensation
- Full Auto Calibration
- Active Motor Noise Cancelling
- High Speed Precision
Multi-Color Printing
The all-new AMS lite is elegant and reliable, making multi-color 3D printing accessible to everyone.
Active Flow Rate Compensation
The A1 mini revolutionizes flow control in 3D printing. It utilizes a high-resolution, high-frequency eddy current sensor to measure the pressure in the nozzle. Our algorithm actively compensates the flow rate according to the readings to extrude with accuracy.
Full Auto Calibration
The A1 mini handles various calibrations all by itself. It meticulously calibrates the Z-offset, bed-level, vibration resonance and nozzle pressure for EVERY print job, automatically.
Plug-N-Play
The A1 mini comes to you pre-assembled, pre-squared, and pre-tuned with precision. It only takes about 20 minutes to set up for your first print.
Active Motor Noise Cancelling
The A1 mini can calibrate parameters to match tiny individual differences between each drive motor. This compensates for the unwanted harshness of motor noise.
Bed Slinger, with CoreXY Speed And Quality（High-Speed Precision）
Full-metal Rails, rigid frame, nozzle pressure sensor, accelerometers, powerful MCU, and above all, an advanced motion control system that utilizes these features to print a 14-minute benchy with quality and following all the speed benchy rules straight out of the box without using specialized filaments.
Sync with Bambu Studio and Bambu Handy
Remote control and monitor your printer on Bambu Studio or Bambu Handy. Through the built-in camera, you can also record timelapse videos.
A1 mini Tech Specs
| Item | A1 mini Specification | |
| Body | Build Volume(W*D*H) | 180*180*180 mm³ |
| Toolhead | Hot End | All-Metal |
| Nozzle | Stainless Steel | |
| Max Hot End Temperature | 300 °C | |
| Nozzle Diameter | 0.4 mm (Included) 0.2 mm, 0.6 mm, 0.8 mm |
|
| Heatbed | Build Plate | Bambu Textured PEI Plate (Included) Bambu Smooth PEI Plate |
| Max Build Plate Temperature | 80°C | |
| Speed | Max Speed of Tool Head | 500mm/s |
| Max Acceleration of Tool Head | 10000mm/s² | |
| Supported Filament | PLA, PETG, TPU, PVA | Ideal |
| ABS, ASA, PC, PA, PET, Carbon/Glass Fiber Reinforced Polymer |
Not Recommended | |
| Sensors | Monitoring Camera | Low Framerate Camera (Up to 1080P) Timelapse Supported |
| Filament Run Out Sensor | Yes | |
| Filament Odometry | Yes | |
| Power Loss Recover | Yes | |
| Filament Tangle Sensor | Yes | |
| Physical Dimensions | A1 mini : 347*315*365 mm³ , Package size : 385*430*460 mm³ , Net weight 5.5 kg , Gross weight 8.2 kg A1 mini Combo : Package size 385*430*495 mm³ , Gross weight (AMS lite included) 10.2 kg |
|
Full advanced features of A1 mini 3D printers : Learn more
Bambu Lab A1 mini Combo
What's in the box
A1 mini
Spool Holder
Purge Wiper
Build Plate
PTFE Tube*1
Bambu Filament Samples (Random Color)
Stainless Steel Nozzle（Included）
Accessory Box
A1 mini Combo Add-ons
AMS lite Stand
AMS lite Body
AMS lite Rotary Spool Holder (x4)
PTFE Tube*3
Frequently asked questions
1.What's the difference between AMS and AMS lite? Does the AMS lite work with any Bambu printer or even other (brand) printers?
A: AMS is enclosed and the AMS lite is non-enclosed.
AMS is incompatible with the A1 mini. If you want a multi-color print using A1 mini, you must use the AMS lite.
AMS lite is incompatible with the X1 or P1 printer and other (brand) printers. If you want a multi-color print using an X1 or P1 printer, you must use AMS. For more details, please check here.
2.What materials can the A1 mini print?
A: The A1 mini can print most of the materials on the market that don't require an enclosure, such as PLA, PETG, TPU, and their support filament. It is not recommended to print filaments such as ABS, ASA, PC, PA,and PET that require higher bed and chamber temperatures.For more details, please check here.
3.Will my order include the Mystery box components kit?
A: For Mystery box components kit, we have prepared a limited quantity of mystery box component kits for complimentary distribution to early purchasers of the A1 mini Combo. First come, first served. The Mystery box components kit cannot be returned or exchanged, nor can it be used as a reason for returning or exchanging the 3D printer.
4.What is the maximum print size of the A1 mini?
A: 180 * 180 *180 mm. For more product specifications , please refer to this page. For more details, please check here.
Bambu Lab
A1 mini Combo
- Multi-Color Printing
- Plug-N-Play
- Active Flow Rate Compensation
- Full Auto Calibration
- Active Motor Noise Cancelling
- High Speed Precision
Multi-Color Printing
The all-new AMS lite is elegant and reliable, making multi-color 3D printing accessible to everyone.
Active Flow Rate Compensation
The A1 mini revolutionizes flow control in 3D printing. It utilizes a high-resolution, high-frequency eddy current sensor to measure the pressure in the nozzle. Our algorithm actively compensates the flow rate according to the readings to extrude with accuracy.
Full Auto Calibration
The A1 mini handles various calibrations all by itself. It meticulously calibrates the Z-offset, bed-level, vibration resonance and nozzle pressure for EVERY print job, automatically.
Plug-N-Play
The A1 mini comes to you pre-assembled, pre-squared, and pre-tuned with precision. It only takes about 20 minutes to set up for your first print.
Active Motor Noise Cancelling
The A1 mini can calibrate parameters to match tiny individual differences between each drive motor. This compensates for the unwanted harshness of motor noise.
Bed Slinger, with CoreXY Speed And Quality（High-Speed Precision）
Full-metal Rails, rigid frame, nozzle pressure sensor, accelerometers, powerful MCU, and above all, an advanced motion control system that utilizes these features to print a 14-minute benchy with quality and following all the speed benchy rules straight out of the box without using specialized filaments.
Sync with Bambu Studio and Bambu Handy
Remote control and monitor your printer on Bambu Studio or Bambu Handy. Through the built-in camera, you can also record timelapse videos.
A1 mini Tech Specs
| Item | A1 mini Specification | |
| Body | Build Volume(W*D*H) | 180*180*180 mm³ |
| Toolhead | Hot End | All-Metal |
| Nozzle | Stainless Steel | |
| Max Hot End Temperature | 300 °C | |
| Nozzle Diameter | 0.4 mm (Included) 0.2 mm, 0.6 mm, 0.8 mm |
|
| Heatbed | Build Plate | Bambu Textured PEI Plate (Included) Bambu Smooth PEI Plate |
| Max Build Plate Temperature | 80°C | |
| Speed | Max Speed of Tool Head | 500mm/s |
| Max Acceleration of Tool Head | 10000mm/s² | |
| Supported Filament | PLA, PETG, TPU, PVA | Ideal |
| ABS, ASA, PC, PA, PET, Carbon/Glass Fiber Reinforced Polymer |
Not Recommended | |
| Sensors | Monitoring Camera | Low Framerate Camera (Up to 1080P) Timelapse Supported |
| Filament Run Out Sensor | Yes | |
| Filament Odometry | Yes | |
| Power Loss Recover | Yes | |
| Filament Tangle Sensor | Yes | |
| Physical Dimensions | A1 mini : 347*315*365 mm³ , Package size : 385*430*460 mm³ , Net weight 5.5 kg , Gross weight 8.2 kg A1 mini Combo : Package size 385*430*495 mm³ , Gross weight (AMS lite included) 10.2 kg |
|
Full advanced features of A1 mini 3D printers : Learn more
Bambu Lab A1 mini Combo
What's in the box
A1 mini
Spool Holder
Purge Wiper
Build Plate
PTFE Tube*1
Bambu Filament Samples (Random Color)
Stainless Steel Nozzle（Included）
Accessory Box
A1 mini Combo Add-ons
AMS lite Stand
AMS lite Body
AMS lite Rotary Spool Holder (x4)
PTFE Tube*3
Frequently asked questions
1.What's the difference between AMS and AMS lite? Does the AMS lite work with any Bambu printer or even other (brand) printers?
A: AMS is enclosed and the AMS lite is non-enclosed.
AMS is incompatible with the A1 mini. If you want a multi-color print using A1 mini, you must use the AMS lite.
AMS lite is incompatible with the X1 or P1 printer and other (brand) printers. If you want a multi-color print using an X1 or P1 printer, you must use AMS. For more details, please check here.
2.What materials can the A1 mini print?
A: The A1 mini can print most of the materials on the market that don't require an enclosure, such as PLA, PETG, TPU, and their support filament. It is not recommended to print filaments such as ABS, ASA, PC, PA,and PET that require higher bed and chamber temperatures.For more details, please check here.
3.Will my order include the Mystery box components kit?
A: For Mystery box components kit, we have prepared a limited quantity of mystery box component kits for complimentary distribution to early purchasers of the A1 mini Combo. First come, first served. The Mystery box components kit cannot be returned or exchanged, nor can it be used as a reason for returning or exchanging the 3D printer.
4.What is the maximum print size of the A1 mini?
A: 180 * 180 *180 mm. For more product specifications , please refer to this page. For more details, please check here.
