?unique=264a70c)
?unique=264a70c)
Bambu Lab A1 mini 3D Printer | Desktop 3D Printer
- Works right out of the box, set up in 15 minutes
- Well-polished hardware and software
- Enclosed-body for high-temperature filament printing
- Up to 16-color printing with AMS
- Up to 20000 mm/s² acceleration, prints a benchy in 18min
- Build-in camera for remote monitoring and timelapse
| Brand: BAMBU LAB |
Bambu Lab A1 Mini 3D Printer
Product Features
Full-auto Calibration.
4-Color Printing with AMS lite.
Under 48 dB Low Noise in Silent Mode.
Full-metal Linear Rails and Bearings.
Vibration and Flow Rate Compensation.
Why Choose Bambu Lab A1 Combo?
Full-auto Calibration
Absolutely Hassle-free
A1 handles various calibrations all by itself. It meticulously calibrates the Z-offset, bed-level, vibration resonance and nozzle pressure for EVERY print job, automatically.
AMS Multi-color Printing
The Most Reliable Multi-color System
The AMS lite has been recognized as the most reliable multi-color 3D printing solution. It also features RFID-sync to automatically match the best print settings for your Bambu filaments, delivering perfect print quality without manual tuning of the filament profile.
Bambu Lab A1 Mini 3D Printer's Key Features
The G.O.A.T Of Entry Level 3D Printers
Multi Color Printing
Active Flow Rate Compensation
Plug N Play
Full Auto Calibration
Multi-Color Printing
The all-new AMS lite with Bambu Lab A1 Mini Combo is elegant and reliable, making multi-color 3D printing accessible to everyone.
Full-auto Calibration
Absolutely Hassle-free
Bambu Lab A1 Combo 3D Printer handles various calibrations all by itself. It meticulously calibrates the Z-offset, bed-level, vibration resonance and nozzle pressure for EVERY print job, automatically.
Plug-N-Play
The A1 mini comes to you pre-assembled, pre-squared, and pre-tuned with precision. It only takes about 20 minutes to set up for your first print.
Active Flow Rate Compensation
The A1 revolutionizes flow control in 3D printing. It utilizes a high-resolution, high-frequency eddy current sensor to measure the pressure in the nozzle. Our algorithm actively compensates the flow rate according to the readings to extrude with accuracy
Active Motor Noise Cancelling
The A1 can calibrate parameters to match tiny individual differences between each drive motor. This compensates for the unwanted harshness of motor noise
Bambu Lab A1 Mini Combo 3D Printer
Specifications
Item | A1 mini Specification | |
Body | Build Volume(W*D*H) | 180*180*180 mm³ |
Toolhead | Hot End | All-Metal |
Nozzle | Stainless Steel | |
Max Hot End Temperature | 300 °C | |
Nozzle Diameter | 0.4 mm (Included) | |
Heatbed | Build Plate | Bambu Textured PEI Plate (Included) |
Max Build Plate Temperature | 80°C | |
Speed | Max Speed of Tool Head | 500mm/s |
Max Acceleration of Tool Head | 10000mm/s² | |
Supported Filament | PLA, PETG, TPU, PVA | Ideal |
ABS, ASA, PC, PA, PET, | Not Recommended | |
Sensors | Monitoring Camera | Low Framerate Camera (Up to 1080P) |
Filament Run Out Sensor | Yes | |
Filament Odometry | Yes | |
Power Loss Recover | Yes | |
Filament Tangle Sensor | Yes | |
Physical Dimensions | A1 mini : 347*315*365 mm³ , Package size : 385*430*460 mm³ , Net weight 5.5 kg , Gross weight 8.2 kg |
