Anycubic Water-Wash Resin+

Highlight

• No Alcohol Needed, User-Friendly: Easy to clean, rinse 3D prints with water instead of alcohol, so save your time and budget; ANYCUBIC Wash and Cure machines are suggested to ensure better effect.
• Low Viscosity, Fast Printing: Low viscosity of the resin means it has great fluidity and requires shorter exposure time during the printing process, which helps to improve printing speed.
• Test Approval, No Cracks: An upgraded formula to prevent models from cracking. Experimental results in Anycubic lab prove that the performance of the 3d models printed with Anycubic Water-Wash Resin+ is stable, and can be placed for a long time without cracking.
• Wide Compatibility: Compatible with 365-405nm wide band, suitable for processing animation, cultural and creative hand-made models, detailed models and prototypes, etc.

Recommended Printing Parameters

Instructions for Use

(1) Before use:

Shake the liquid resin before use; Clean the resin tank and the molding platform to keep the bottom of the resin tank in light transmission.

(2) When using:

Unscrew the cap and add it to the resin tank according to the equipment requirements; Select the correct print parameters and settings for printing.

(3) After use:

After printing, please use the matching tools for post-processing, including blade, diagonal pliers,tweezers,containers,gloves;ethanol(≥95%),lactate or isopropyl alcohol cleaning solution;

(4) Post-processing steps:

A. Remove the printed model from the molding platform with a blade;

B. Submerge the model in the cleaning solution, rinsed or ultrasonically washed, then taken

out and drained; Anycubic Wash and Cure machines are suggested to ensure better effect.

Proper processing, such as removing support, polishing, coloring, etc.

Precautions

1. The ideal condition for storing uncured resin is a cool, dark place at room temperature and protect from light to avoid high temperature or sunlight.
   
2. Suggested operating temperature is 18-35°C, and a low temperature may affect the printing effect, thus, the resin can be properly preheated before use (not more than 60°C).
3. If the resin pigment settles, it can be used after stirring or shaking.
4. In order to ensure the performance of the resin, please take out the model in time after cleaning to avoid the model soaking in water for a long time.
5. To ensure the mechanical properties of the model, please perform post-curing in time after cleaning and drying.
6. To ensure the ideal performance of the curable material, it is necessary to control the intensity and time of the light source after curing. Therefore, the following steps are recommended:
   (1) The intensity of mercury lamp or Led light source is 5-10mW/m?, and the duration is no more than 1 hour (self-regulation);
   (2)The exposure time in the sun (summer) is around 1 hour;
   (3) Proximity or long-term exposure under strong light sources such as high-power high-pressure mercury lamps is prohibited.
   (4) lt is recommended to print in a dark room or be covered with a lid while printing as resin is a photosensitive
   material.

Ps: Material properties will vary depending on the molding equipment, post-curing method and testing equipment. For safety information

please refer to the MSDS of this product. lf you encounter any problems while using, please feel free to contact us.