Anycubic Photon Mono M7 Max 3D Printer | Bigger & Better

Maximum precision and efficient resin usage - the Anycubic Photon Mono M7 Max brings innovation on all levels. With optimized exposure, intelligent resin recycling management and advanced temperature control system, you can master even the most demanding projects effortlessly. Discover how smart technology takes your print quality to the next level!

Light Turbo 3.0 lighting system with COB light source and Fresnel lens

The Photon Mono M7 Max uses Lightbulb 3.0 technology in combination with a COB light source and a Fresnel lens that are calibrated at the factory. The innovative technology ensures that a light intensity within an angle of ≤ 3° is emitted onto the printing area with a uniformity of ≥ 90%. This means there are no disturbing light sources that could affect the 13.6-inch black and white screen surface.

7K screen for razor-sharp details

The impressive 13.6-inch monochrome 7K screen (6480 x 3600 pixels) of the Photon Mono M7 Max offers a razor-sharp resolution of 46 x 46 microns on the X and Y axes. This makes printing a unique experience - with a minimum layer thickness of just 0.1 mm and an incredible speed of up to 63 mm/h!

This printer combines rapid material output with a level of detail that brings even the finest textures to life. The combination of the anti-aliasing function and the precise positioning screws makes unsightly layer lines and raster effects disappear almost as if by magic.

Intelligent Release 2.0

With Intelligent Release 2.0, problems such as incomplete detachment of delicate parts or layer separations in large models are a thing of the past.

A clever algorithm and a series of integrated mechanical sensors allow the peel-off force of the model to be calculated precisely. Thanks to the highly accurate calculations, the printing platform is raised in real-time for each individual layer to exactly the height required by the sliced model data. This significantly increases the success rate when printing high-quality models.

By using advanced mechanical sensors, the state of the resin flow is monitored in real-time. Combined with an improved speed control feature, the curing time for each individual layer is optimally adjusted based on the sliced model data. This precise tuning guarantees exact exposure of the surface of each layer, ensuring impressive details and flawless surface quality.

Tip: Thanks to Intelligent Release, the printing speed of the Photon Mono M7 Max can be increased by an amazing 10-40%!

Print your greatest masterpiece!

With the Photon Mono M7 Max you get a generous printing area of 298 x 164 x 300 mm (14.7L), giving you all the freedom to make your boldest ideas a reality.

Thanks to the 72% increase in build volume compared to the Photon Mono M7 Pro, you can easily start with a printing farm and print multiple models at the same time!

Resin Vat with dynamic temperature control

The Photon Mono M7 Max's innovative temperature control system automatically preheats the resin to a comfortable 25 °C. Strategically placed high-performance heating strips with 120W power surround the resin tank and ensure that the resin is heated evenly from the outside to the inside.

The platform automatically moves up and down to ensure it reaches the entire resin area evenly. Once printing starts, the system automatically stops the heating function - this saves energy and ensures hassle-free operation.

For creative minds who prefer a more individual approach, there is the option of manually preheating the resin within a temperature range of 25 to 40 °C. This way, you can respond specifically to the requirements of different materials and get the most out of your printer!

Resin Recycling Management

The Photon Mono M7 Max 's advanced Air Pump module works hand in hand with a precise sensor that monitors the remaining resin during the printing process. This means that the resin tank is automatically refilled depending on how much resin is used. This smart technology minimises material waste and ensures that your printing projects can continue without interruption.

Intelligent assistance systems

With intelligent assistance systems, you are well prepared for each of your 3D printing projects:

► Printer auto-inspection:

The printer automatically performs a quick self-test to ensure that its individual components are functioning properly.

► Residual Resin Detection:

Automatically monitors the resin level and provides timely warnings to refill when the level falls below the amount required for the cutting process.

► Failed Print Detection:

If errors are detected, the 3D printer stops the printing process and informs you about possible damage to the model. This allows you to intervene as quickly as possible and save your prints in time.

► Intelligent Lifespan Management:

This function counts how often the release liner has been used. After around 45,000 uses, you will be reminded to replace the liner soon.

► Resin Residue Detection:

Thanks to a mechanical algorithm, resin residues in the resin tank are automatically detected to prevent the display from breaking.

Screen Protection

The sophisticated dual protection design combines a highly translucent, scratch-resistant protective film with a back adhesive protective sticker. This combination minimizes the risk of resin leaks after exposure and protects your printer all around.

Additional features of Anycubic Photon Mono M7 Max

• The possibility to tilt the printing platform slightly (5°) after printing to allow excess resin from the model to flow back into the resin vat,
• Flip-open cover design with one-handed operation, effectively blocks UV radiation,
• 4-point levelling,
• Enlarged resin container (1300 ml) for larger models or industrial components,
• Can be connected to an external air purifier,
• Powerful motherboard,
• 4.3-inch resistive display with user-friendly display,
• Anycubic Photon Workshop Slicer offers comprehensive support,
• Anycubic app for multi-device sync and cloud printing,
• Maker online ecosystem where you can explore the imagination of other 3D printing enthusiasts, share your creations with the community and take part in exciting competitions or prize draws.

Included in delivery:

• 1 x Anycubic Photon Mono M7 Max
• 1 x printing platform
• 1 x resin Vat
• 2 x scrapers
• 1 x Allen key set
• 1 x levelling paper
• 1 x cover of the Auto-Fill Unit
• 1 x power cable
• 1 x USB drive
• 1 x power adapter
• 1 x protective gloves
• 1 x filter
• User Manual

Specifications

• Build volume

  298mm*164mm*300mm

• Printing volume

  14.7L

• Build platform

  Laser engraving aluminum alloy

• Operating screen

  4.3" Touch-Control

• Lcd screen size

  13.6", 7K

• Resin vat

  1.3L Unibody desiqn with scale lines

• Antenna port

  Yes

• Light source

  COB light source+front-facing reflectors+Fresnel Lens

• Light uniformity

  ≥90%

• Light intensity

  4500±500 μw/cm²

• Machine leveling

  4-point manual leveling

• Xy resolution

  46*46μm

• Z axis

  Double liners with 10μm accrace

• Slicing software

  Anycubic Slicing, CHITU & Lychee (Can be supported by the end of Dec.)

• File transfer

  USB & WiFi. LAN (Can be supported around Q4 2024）

• Release film

  ACF Film

• Power supply

  180W rated power

• Anycubic app

  Support

• Weight

  Machine Weight: 24kg / 52.91 lbs, Package Weight: 28.5kg / 62.83 lbs

• Size

  Machine Dimensions: 425*362*652mm, Package Dimensions: 785mm*520mm*490mm

• Hinged cover

  Effectively blocks UV radiation, Supports one-hand opening and hovering angles anywhere greater than 45°

• Printing speed

  Max Speed ≤31mm/h, 0.05mm Layer With Standand Resin; Max Speed ≤63mm/h, 0.1mm Layer With Standand Resin; Max Speed ≤86mm/h, 0.1mm Layer With High-Speed Resin

• Support language

  English, Chinese, German, French, Italian, Spanish, Russian, Japanese.

• Material

  Compatible with kinds of resin (high speed, water-washable, standard, ABS-like, plant-based, etc.)

• Resin vat

  1.3L Unibody desiqn with scale lines

• Protection film

  Replaceable anti-scratch film

• Air purifier

  USB

Anycubic Photon Mono M7 Max 3D Printer in Pakistan available at VERTEX 3D